GH1440A/GH1430A
| Distance between centers | 1000mm |
40" |
| Swing over bed | 360mm |
14" |
| Swing over gap | 506mm |
20" |
| Swing over cross slide | 220mm |
8-3/5" |
| Bed width | 206mm |
8-1/8" |
| Taper of spindle bore | MT5 |
MT5 |
| Spindle nose | D1-4 |
D1-4 |
| Taper of tailstock quill | MT3 |
MT3 |
| Spindle bore | 38mm |
1-1/2" |
| Step of spindle speeds | 16 |
16 |
| Range of spindle speeds | 45-1800rpm |
45-1800rpm |
| Range of cross feeds | 0.015~0.22mm/r |
0.0006~0.0147"/r |
| Range of longitudinal feed | 0.043-0.653mm/r |
0.0012-0.0294"/r |
| Range of inch threads | 4~112T.P.I |
4~112T.P.I |
| Range of metric threads | 0.45-7.5mm |
0.45-7.5mm |
| Top slide travel | 89mm |
3-1/2" |
| Cross slide travel | 152mm |
6 " |
| Carriage travel | 945mm |
37-1/4" |
| Travel of tailstock quill | 120mm |
4-3/4" |
| Motor | 2.4KW |
3HP |
| Packing size | 2020 x 760 x 1200mm |
80" x 30" x 48 " |
| Net weight | 700kg |
1540lb |
| Four-jaw chuck |
1pc |
| Face plate |
1pc |
| Steady rest |
1pc |
| Follow rest |
1pc |
| Stand |
1pc |
| Toolbox&tools |
1set |
COPY RIGHT OF TECHMASTER 2005