MODEL |
ZX-25 |
Max. drilling capacity |
¦µ25mm (1¡±) |
Max. diameter of face milling cutter |
¦µ63mm (2 1/2¡±) |
Max. diameter of end milling cutter |
¦µ13mm (1/2¡±) |
Swing |
¦µ405mm (15 7/8¡±) |
Max. distance from spindle nose to table |
380mm (15¡±) |
Spindle taper |
MT-3 (R-8) |
Max. spindle travel |
100mm (4¡±) |
Spindle barrel diameter |
62mm (2 1/2¡±) |
Range of spindle speed |
90-2150 r.p.m/50Hz
110-2580 r.p.m/60Hz |
Step of spindle speed |
12 steps |
Rotation angle of headstock |
360 o |
Column diameter |
92mm (3 7/10¡±) |
Longitudinal travel of table |
160mm (6 1/4¡±) |
Transverse travel of table |
370mm (14 1/2¡±) |
Table area |
585mm¨w190mm (23¡±¨w 7 1/2¡±) |
Motor power |
3/4HP(0.56KW)
or 1HP(0.75KW) |
Motor voltage |
110V/60HZ |
